TP 321 | UNS S32100 | TPS-INOX-4541-321
High carbon steels prone more to intercrystalline attack in weld zones and slower cooling sections. This steel avoids such attacks through its stabilization with Ti. The corrosion behaviour of this alloy in natural environments is very similar to the TP 304/304L alloys. Architecturally, it may not be adequate for near-industrial or onshore locations in Europe. Satisfactory in many low-chloride waters, it is prone to pitting or crevice corrosion in seawater. Water treatment, galvanic protection and deaeration can influence the performance.
- Heat Exchanger Tubes
- Boiler Tubes & Pipes
- Line Pipes
- Hydraulic Tubes
- Instrumentation Tubes
- Structural Pipes
- Mechanical Tubes & Pipes
TPS Technitube supplies TP 321 | UNS S32100 | TPS-INOX-4541-321 in a big variety of forms incl.:
Seamless Tubes & Pipes
Welded Tubes and Pipes
Buttweld Fittings
Forged Fittings
Flanges and Forgings
Plates, Sheets and Bars
Chemical Composition
| C | = 0.08 % max | S | = 0.030 % max | |
| Si | = 0.75 % max | Ni | = 9.00-13.00 % | |
| Mn | = 2.00 % max | Cr | = 17.00-20.00 % | |
| P | = 0.040 % max | Others | = Ti Ž 5xC, max 0.60% |
Mechanical properties all at room temperature
| Elongation in 2 in or 50 mm, (or 4D), min 40% | |
| YS min | |
| KSI (MPa) | = 30[205] |
| TS min | |
| KSI [MPa] | = 75[515] |
| El. Min | 35 |
Please select your country to contact us
TPS-Technitube Röhrenwerke GmbH
Julius-Saxler-Str. 7 | 54550 Daun/Germany
Tel.: +49 65 92 71 20 | Fax: +49 65 92 1305
www.technistock.de | www.tpsd.de | E-Mail: service@tpsd.de
