TP 405 | UNS S40500 | TPS-FS-4002-405
TP 405 is a low carbon, 12% chrome steel, not subject to appreciable hardening through air-cooling from high temperatures. This tendency retards the formation of hardening cracks caused by welding. Practically the same corrosion and oxidation resistance as TP 410. Can be machined, drawn, spun and formed without difficulty. Used for applications where hardening upon cooling from high temperatures must be avoided. Has an excellent long-time stability up to 1200°F.
- Heat Exchanger Tubes
- Boiler Tubes & Pipes
- Line Pipes
- Hydraulic Tubes
- Instrumentation Tubes
- Structural Pipes
- Mechanical Tubes & Pipes
TPS Technitube supplies TP 405 | UNS S40500 | TPS-FS-4002-405 in a big variety of forms incl.:
Seamless Tubes & Pipes
Welded Tubes and Pipes
Buttweld Fittings
Forged Fittings
Flanges and Forgings
Plates, Sheets and Bars
Chemical Composition
| C | = 0.08 % max | S | = 0.030 % max | |
| Si | = 0.75 % max | Ni | = 0.50 % max | |
| Mn | = 1.00 % max | Cr | = 11.50-13.50 % | |
| P | = 0.040 % max | Others | = Al 0.10 – 0.30 % |
Mechanical properties all at room temperature
| Elongation in 2 in or 50 mm, (or 4D), min 40% | |
| YS min | |
| KSI (MPa) | = 30[205] |
| TS min | |
| KSI [MPa] | = 60[415] |
| El. Min | 20 |
Please select your country to contact us
TPS-Technitube Röhrenwerke GmbH
Julius-Saxler-Str. 7 | 54550 Daun/Germany
Tel.: +49 65 92 71 20 | Fax: +49 65 92 1305
www.technistock.de | www.tpsd.de | E-Mail: service@tpsd.de
