Top

 

 

Contact Us

TP 410 | UNS S41000 | TPS-FS-4006-410

This 12% chrome steel is very deep hardening, meaning that hard martensitic is formed at cooling rates as slow as 20°C/minute. The hard brittle martensitic require prompt tempering at a high enough temperature to improve impact properties. Increasing nickel achieves a better combination of properties. Not very resistant to aerated seawater. Welding is limited because high preheat and immediate post weld tempering is necessary to minimize the risk of hard zone cracking. Type 410 is not equal to the austenitic steels in corrosion resistance, but satisfactorily withstands the effects of the milder acids, alkalis, fresh water and atmospheric conditions. It is the least costly of the stainless steels, containing just enough to yield stainless properties.

  • Heat Exchanger Tubes
  • Boiler Tubes & Pipes
  • Line Pipes
  • Hydraulic Tubes
  • Instrumentation Tubes
  • Structural Pipes
  • Mechanical Tubes & Pipes

TPS Technitube supplies TP 410 | UNS S41000 | TPS-FS-4006-410 in a big variety of forms incl.:

Chemical Composition

C = 0.15 % max S = 0.030 % max
Si = 0.75 % max Ni = 0.50 % max
Mn = 1.00 % max Cr = 11.50-13.50 %
P = 0.040 % max

Mechanical properties all at room temperature

Elongation in 2 in or 50 mm, (or 4D), min 40%
YS min
KSI (MPa) = 30[215]
TS min
KSI [MPa] = 60[415]
El. Min 20

 

 

Please select your country to contact us

Contact Us

    I agree that my data may be used for processing your messages and will be deleted at the very latest six month after my enquiry is processed.

    TPS-Technitube Röhrenwerke GmbH
    Julius-Saxler-Str. 7 | 54550 Daun/Germany
    Tel.: +49 65 92 71 20 | Fax: +49 65 92 1305
    www.technistock.de | www.tpsd.de | E-Mail: service@tpsd.de