UNS N02201 - EN/DIN 2.4068 – LC-Ni 99
UNS N02201 is more or less the same as UNS N02200 but with a lower Carbon content to prevent embrittlement by inter granular carbon at temp. over 315 °C. The lower carbon content also reduces the hardness of the Material.
As one of the worlds first class manufacturer and stockist of Alloy UNS N02201 we supply this Material to many different industries such as oil and gas, power generation, petrochemical and other industries.
TPS Technitube supplies UNS N02201 in a big variety of forms incl.:
Seamless Tubes & Pipes
Welded Tubes and Pipes
Buttweld Fittings
Forged Fittings
Flanges and Forgings
Plates, Sheets and Bars
Mechanical values
Annealing condition:
5 in. (127 mm) in outside diameter and under
| Tensile Strength, min, MPa: | 345 | |
| Yield Strength (0,2% offset), min, MPa: | 80 | |
| Elongation in 2 in. or 50 mm ( or 4 D), min, %: | 35 | |
Mechanical values
Annealing condition:
Over 5 in. (127 mm) in outside diameter
| Tensile Strength, min, MPa: | 345 |
| Yield Strength (0,2% offset), min, MPa: | 70 |
| Elongation in 2 in. or 50 mm ( or 4 D), min, %: | 40 |
Mechanical values
Annealing condition:
Stress-Relieved: All sizes
| Tensile Strength, min, MPa: | 415 |
| Yield Strength (0,2% offset), min, MPa: | 205 |
| Elongation in 2 in. or 50 mm ( or 4 D), min, %: | 15 |
Chemical Analysis
| C | = 0,02% max | Mn | = 0,35% max |
| S | = 0,01% max | Si | = 0,35% max |
| Ni | = 99,0% min | Cu | = 0,25% max |
| Fe | = 0,40% max |
Please select your country to contact us
TPS-Technitube Röhrenwerke GmbH
Julius-Saxler-Str. 7 | 54550 Daun/Germany
Tel.: +49 65 92 71 20 | Fax: +49 65 92 1305
www.technistock.de | www.tpsd.de | E-Mail: service@tpsd.de
