UNS S32750
In the solution annealed condition, Super Duplex UNS S32750 – 1.4410 has a balanced austenitic-ferritic microstructure, is mechanically highly resistant and shows an excellent corrosion resistance in seawater. Due to its high resistance, weight and therefore material costs can be saved compared to other qualities. This material grade is particularly suitable for applications in the Oil & Gas industry, in desalination plants, in the Chemical industry as well as for geothermal applications. The characteristics of UNS S 32750 are as follows: • high stress corrosion resistance in chloride- and hydrosulphide-containing environment • high corrosion resistance to seawater • high resistance to pitting, crevice corrosion and general corrosion • mechanically very resistant • very good weld ability • good thermal conductivity with low thermal expansion
- Heat Exchanger Tubes
- Boiler Tubes & Pipes
- Line Pipes
- Hydraulic Tubes
- Instrumentation Tubes
- Structural Pipes
- Mechanical Tubes & Pipes
TPS Technitube supplies UNS S32760 | Technisuperduplex TSD2507 in a big variety of forms incl.:
Seamless Tubes & Pipes
Welded Tubes and Pipes
Buttweld Fittings
Forged Fittings
Flanges and Forgings
Plates, Sheets and Bars
Chemical Composition
C | = 0.030 % max | S | = 0.020 % max | |
Si | = 0.80 % max | Ni | = 6.00-8.00 % | |
Mn | = 1.20 % max | Cr | = 24.0-26.0 % | |
P | = 0.035 % max | Mo | = 3.00-5.00 % | |
N | = 0.24-0.32 % | Cu | = 0.50% | |
Mechanical properties all at room temperature
Elongation in 2 in or 50 mm, (or 4D), min 40% | |||||
YS min | Brinell | ||||
KSI (MPa) | = 80[550] | max | 310 | ||
TS min | Rockwell | ||||
KSI [MPa] | = 116[800] | C max | 32 | ||
El. | |||||
min | 15 |
Please select your country to contact us
TPS-Technitube Röhrenwerke GmbH
Julius-Saxler-Str. 7 | 54550 Daun/Germany
Tel.: +49 65 92 71 20 | Fax: +49 65 92 1305
www.technistock.de | www.tpsd.de | E-Mail: service@tpsd.de