Range of dimensions for seamless tubes

We manufacture seamless tubes in a range of dimensions with outside diameters from 6.00 to 44.50 mm and wall thicknesses from 0.89 to 7.00 mm. We also supply tubes in various lengths ranging from short pieces of less than 1.700 mm to manufacturing lengths of up to 18.000 mm.

Scope of dimensions*

* Dimensions not shown on request

Gruppe 1: Austenit, Ferrit, N02200, N02201, N04400, N06600, N08020

Gruppe 2: Gruppe 1, Super Austenit, Duplex, N10276

Gruppe 3: Gruppe 2, Super Duplex, N06455, N06625, N08800, N08825

Gruppe 4: Gruppe 3, Titan

	WD	[mm]	0,89	1,24	1,65	1,82	2,11	2,35	2,41	2,64	2,77	2,87	3,20	3,25	3,91	6,35
AD		[inch]	0,035	0,048	0,065	0,072	0,083	0,093	0,095	0,104	0,109	0,113	0,126	0,128	0,154	0,250
[mm]	[inch]
6,00
6,35	0,250
7,00
7,50
8,00
9,00
9,53	0,375
10,00
11,00
12,00
12,70	0,500
13,00
13,50
14,00
15,00
15,88	0,625
16,00
16,80
17,15	0,675
18,00
19,00
19,05	0,750
20,00
21,34	0,840
21,40
22,00
22,23	0,875
23,00
24,30
25,00
25,20
25,40	1,000
26,00
26,67	1,050
28,00
30,00
31,75	1,250
32,00
33,40	1,315
35,00
36,00
38,00
38,10	1,500
42,00
44,50	1,750

Finished tube lenghts

OD - tube	Length
from ø4,55 mm	1.700 – 6.000 mm
from ø9,53 mm	1.700 – 10.000 mm
from ø12,00 mm	1.700 – 14.000 mm
from ø16,00 mm	2.000 – 18.000 mm

Tolerances

OD - Tube	OD	WT	special WT	ID
ab Ø4,55 mm	±0,050 mm	±0,150 mm	±0,100 mm	X
ab Ø9,53 mm	±0,050 mm	±0,100 mm	±0,080 mm	±0,050 mm
ab Ø30,00 mm	±0,100 mm	±0,150 mm		±0,050 mm

Lengths tolerances

Lengths	Tolerance
up 7.300 mm	-0 / + 3 mm
from 7.301 up to 10.300 mm	-0/ + 6 mm
from 10.301 up to 13.300 mm	-0 / + 9 mm
from 13.301 up to 18.000 mm	-0 / + 12 mm

You have Questions?
We have answers!

+49 6592 / 712-0
service@tpsd.de
Contact form

INOS

Range of dimensions for seamless tubes

Scope of dimensions*

Finished tube lenghts

Tolerances

Lengths tolerances